The stuff Hacker News actually recommends.

3D printers

Creality Ender 3 vs Prusa

Hacker News owners lean toward the Prusa.

Creality Ender 3Prusa
Owners with an opinion35208
Positive verdicts50% of 2277% of 186
Positive/negative since 20244/788/27
Happy after 3+ years18
Longest happy owner5 yrs10 yrs
Praised forvalue and reliabilityreliability and ease of use
Criticized forease of use and performancevalue and performance
Newest comment

Updated

What owners wrote about both

Creality Ender 3: Likes itPrusa: Recommends it
Yeah, I did the printer as a hobby thing when I built my first reprap. It was fun, and I learned a ton, but the state of the art in 2014 just wasn't there for low-end machines to be reliable. I replaced it with a prusa in 2019,and I have had zero issues at all with it. The only print failures I've had were either due to part design or bad filament (pla stored in a humid garage). I've been super impressed with the quality of the machine, and have printed some fairly challenging parts. Plus, the whole machine is open and hackable. I didn't really even consider other printers, since I wanted to support prusa and what they have done for the community. Although I have used a friend's ender 3, and I was pretty impressed with the quality for the price.
Creality Ender 3: Doesn’t like itPrusa: Likes it
I don't think it has anything to do with a halo around Asian companies. Bambu and Creality are both Chinese. I've used plenty of Prusa, Ender, and Bambu printers, and this is what I've found: Bambu: break the least. That's it, that's the whole secret to why everyone recommends them. Sure, the print quality is good, and there are some nice QOL things, but they took off because you can hit print and expect to get a print. Prusa: These are mostly reliable. Not as reliable as Bambu. The Prusa printer I have right now has had two fatal malfunctions over the years I've used it, both of which were due to design flaws Bambu printers don't have. They are making a lot of progress, and I hope they catch back up. Creality (Ender manufacturer): No one should buy Creality products. They are worthless. Everything from the lowest bargain-bin Ender 3 to the latest K2 Plus will break and might burn the building down.
Creality Ender 3: Doesn’t like itPrusa: Recommends it
Same here. Now I have an A1 + A1 mini too. It's amazing. This is what I dreamed of when I built my first RepRap. I did get me Ender 3 working eventually but the print quality isn't as good as any of the Bambu printers and it's super slow. The new CoreXY Prusa One is also a very good buy when it comes out but the A1/A1 mini in particular are just such a good deal at the moment.
Creality Ender 3: NeutralPrusa: Likes it
Author here. I have used Prusas, as well as many other 3D printers. I know how they are distinguished from the rest. The thing is, there really isn't much of a difference between an Ender 3 and a Mk4 that a typical consumer (that is, not an enthusiast) would understand as justifying the bigger price tag. The Mk4 is a better printer , by a long shot, but not by the same factor as the price tag. The Mk4 price completely eliminates Prusa from the entry- to mid-level market which is a big lost opportunity when new enthusiasts are learning on other brands -- and by the time they want to upgrade to a Mk4 price-point, they have much, much better options than Prusa and brand loyalty to someone else. Prusa is not the right choice at any price point anymore and has little to no market relevance left, except maybe among a certain niche of enthusiasts.
Creality Ender 3: Doesn’t like itPrusa: Likes it
I can see why Prusa is annoyed that people clone his designs and then sell them for cheaper. The end result is not truly the value that his company provides; it's all the careful tweaking of the firmware to make it work perfectly every time that probably accounts for 80% of their engineering cost, and it hurts when someone takes that from you. (Compare the out of the box experience between an i3 and an Ender 3, for example. Absolutely nothing stopping Creality from making it perfect like Prusa, but I bet most Ender 3 users don't get a decent print until they self-tweak settings that should be correct from the factory.) Having said that, I think what hurts Prusa the most is their inability to keep up with demand from the US. The cheap clones win because they're still cheaper after Amazon same-day delivery. With Prusa, ordering a 3D printer is a "if you're really lucky, you might have one in a couple months" situation. This is costing them way more revenue than people cloning their motherboards. If they could sell to the US market efficiently, they would be making so much money they probably wouldn't even realize a couple of Aliexpress stores were selling outright clones. (I indeed started my 3D printing adventure with a cheap printer that shipped to me overnight. And regretted every moment with that god awful piece of shit. At that point, I knew it was time to get something good, and it was well worth the 3 or 4 months I waited for an i3. But, most people give up muc…
Creality Ender 3: NeutralPrusa: Likes it
It absolutely doesn't do things "just as well". I bought an Ender 3 quite cheaply (less than €150). I've spent countless hours, fiddling, upgrading, repairing obvious small flaws until it printed really well. Granted, I leaned a LOT about all things relating 3D printing during this journey. But, there was a lot of frustration, time spent, and even a good amount of money. I don't regret it the slightest, I learned important skills. But, we bought a Prusa MK3.5 at my work, and, it just worked, since day one (came pre assembled). No fiddling, no slicer tunning, nothing. We just asked it to print, and done. So, don't think a 5x cheaper print is equivalent to a Prusa, it's just not.
Creality Ender 3: Doesn’t like itPrusa: Likes it
Reliability and speed. An Ender 3 will produce good prints if it's well tuned, but there are a lot of quirks to the design (mostly as a result of cost-cutting) that can cause problems out of the box and will cause problems over time. Prusa printers are far from perfect, but they're trusted by a lot of print farm operators to run 24/7 with very little attention. Modern CoreXY printers like the Bambu Lab or Voron machines are crazy fast compared to an Ender 3, without any real compromise in print quality or reliability. That isn't necessarily a big deal for hobbyists, but it's very useful when you're iterating on a design. For users who care about print speed, the issue is generally latency rather than throughput. https://www.youtube.com/watch?v=NFdfYn0DTUk
Creality Ender 3: Likes itPrusa: Recommends it
I do recommend Prusa to new 3D printing hobbyists because there are a lot of quality of initial experience features on them. That acknowledged, my (lightly modded) Ender3s, a Flashforge Creator clone, and an SKTank kit-built printer all also “just work” and can use the same machine settings in slicer thanks to Klipper macros (to the point that I’ll often start a print on them in the basement without ever going down there and checking that the first layer looks okay). I’d say I’m well above 97% for prints work without any fuss.
Creality Ender 3: Recommends itPrusa: Recommends it
Mostly because they are proprietary in a community with an open philosophy, and for being successful doing that. Most consumer-level 3D printers are derived from the RepRap project, which was about making a 3D printer that prints 3D printers. So if you want your own printer, find someone who already has one to print the specialized parts for you, add a few standard parts (screws, motors, etc...) and build your own, which you can then use to make 3D printers for others. You can then share designs, improve, etc... Totally in the open source spirit, of course, the software part is similarly open source, usually GPL licenced. And this spirit is found in most of the consumer-level 3D printing world. With open source firmwares and slicers, easy to modify machines, and standard parts. I think one of the the companies that exemplify this the most is Prusa. They 3D print their printers using their own printers, and open source most for their work. But then BambuLabs came along, and they have proprietary components, a proprietary firmware and a cloud-based system. Their slicer is open source, they don't really have a choice because it is based on GPL software, but they recently made it harder to use the forked version some people made (namely OrcaSlicer), and they did so via an automatic update. Of course people didn't really appreciate. But maybe the worst part is that BambuLabs printers are actually really great and popular printers, for an affordable (but not cheap) price. And many…